HP Rx2620-2 - Integrity - 0 MB RAM Service Manual page 146

Example C-4 help cpuconfig Command
Shell> help cpuconfig
Deconfigure or reconfigure cpus
CPUCONFIG [module] | [threads] [on|off]
module : Specifies which cpu module to configure
threads : Use to display info or configure threads
on|off : Specifies to configure or deconfigure a cpu module or threads
Note:
1. Cpu status will not change until next boot.
2. Specifying a cpu number without a state will display
configuration status.
Examples:
* To deconfigure CPU 0
fs0:\> cpuconfig 0 off
Cpu will be deconfigured on the next boot.
* To display configuration status of cpus
fs0:\> cpuconfig
PROCESSOR MODULE INFORMATION
CPU
Module
------
0
1
* To display cpu thread status
fs0:\> cpuconfig threads
cpuconfig: Threads are turned off.
* To enable cpu threads
fs0:\> cpuconfig threads on
cpuconfig: Threads will be on after a reset
* To disable cpu threads
fs0:\> cpuconfig threads off
cpuconfig: Threads will be off after a reset
146 Utilities
# of
Logical
CPUs Speed
------- --------
2 1.1 GHz
2 1.1 GHz
L3 L4 Family/
Cache Cache Model
Size Size (hex.)
------ ------ -------
4MB 32MB 1F/01
4MB 32MB 1F/01
Processor
Rev State
--- ------------
B1 Active
B1 Active