Replacing The Power Supply; Releasing The Power Supply Retaining Clip; Removing The Power Supply - HP Rx2620-2 - Integrity - 0 MB RAM Service Manual

2. Press the power supply retaining clip to unlatch the power supply release lever. See
Figure 4-12
Figure 4-12 Releasing the Power Supply Retaining Clip
3. Press the power supply release lever and pull the power supply out of the server.
Figure 4-13 Removing the Power Supply

Replacing the Power Supply

To replace the power supply:
1. Remove the front bezel from the server and remove the defective power supply if you have
not already done so.
2. Open the power supply release lever on the replacement power supply and push the power
supply into place.
3. Push in and up on the power supply release lever to lock the retaining clip in place.
and Figure 4-13.
Removing and Replacing Hot-Swap and Hot-Plug Devices 49