HP Rx2620-2 - Integrity - 0 MB RAM User Manual
Integrity servers with microsoft windows server 2003 for itanium-based systems
Hide thumbs
Also See for Rx2620-2 - Integrity - 0 MB RAM:
- Service manual (177 pages) ,
- Manual (122 pages) ,
- User manual (110 pages)
Related Manuals for HP Rx2620-2 - Integrity - 0 MB RAM
Summary of Contents for HP Rx2620-2 - Integrity - 0 MB RAM
- Page 1 HP Integrity Servers with Microsoft Windows Server 2003 for Itanium-based systems HP Smart Update Manager User Guide HP Part Number: 5992-0990 Published: December 2007...
- Page 2 © Copyright 2007 Hewlett-Packard Development Company, L.P Confidential computer software. Valid license from HP required for possession, use or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor's standard commercial license.
-
Page 3: Table Of Contents
Table of Contents About This Document......................7 Intended Audience..........................7 Typographic Conventions........................7 HP Encourages Your Comments......................7 1 Deploying HP Integrity Support Packs in Windows............9 Overview..............................9 Minimum requirements for Integrity servers..................9 2 ISPs powered by HP Smart Update Manager............11 Deployment scenarios...........................11 Graphical deployment on a local host.....................11 Scripted deployment on a local host....................11 Deployment to multiple remote hosts.....................12 First-time installations..........................12... - Page 4 Glossary..........................41 Table of Contents...
- Page 5 List of Figures Inventory Progress Screen......................13 Select Installation Host(s) Screen – Local..................14 View Options..........................14 Select Bundle Filter Screen......................15 Select Items to be Installed Screen....................16 Select Installation Host(s) Screen – Local Host................17 Status Field............................19 Installation Results Screen for Single Host...................19 Smart Update Manager Installation Log..................20 2-10 Select Installation (Host(s) Screen –...
-
Page 7: About This Document
About This Document This document describes using the HP Integrity Essentials Foundation Pack version 5.5 to deploy Integrity Support Pack (ISP) software components from a single, easy-to-use interface. Intended Audience This document is for system administrators using the HP Integrity Essentials Foundation Pack version 5.5 to deploy Integrity Support Pack (ISP) software components. -
Page 9: Deploying Hp Integrity Support Packs In Windows
1 Deploying HP Integrity Support Packs in Windows Overview Beginning with HP Integrity Essentials Foundation Pack version 5.5, the HP Smart Update Manager utility enables you to deploy Integrity Support Pack (ISP) software components from a single, easy-to-use interface. This utility enables legacy support of existing software while simplifying the overall deployment process. -
Page 11: Isps Powered By Hp Smart Update Manager
2 ISPs powered by HP Smart Update Manager Deployment scenarios HP Smart Update Manager deploys software smart components on a local host or one or more remote hosts. The remote hosts must be online and running the same operating system as the system running HP Smart Update Manager. -
Page 12: Deployment To Multiple Remote Hosts
Deployment to multiple remote hosts The following figure illustrates the multiple-host deployment process. To deploy components to multiple remote hosts using the GUI: Ensure all minimum requirements are fulfilled as described in “Minimum requirements for Integrity servers” (page Ensure that the components to be deployed are accessible to the administrative system and are available in the same directory as the HP Smart Update Manager. -
Page 13: Selecting An Installation Host
Figure 2-1 Inventory Progress Screen Selecting an installation host The Select Installation Hosts screen appears when the inventory process is complete. First-time installations... -
Page 14: Select Installation Host(S) Screen - Local
Figure 2-2 Select Installation Host(s) Screen – Local The Select Installation Hosts screen enables you to choose a host for component installation. By default, the first time you run the HP Smart Update Manager on a particular system, the only host available is the Local Host. -
Page 15: Selecting Bundles To Filter
Next Proceeds to the next step in the installation process. Exits the HP Smart Update Manager. Exit To continue with the deployment process, click Next. If the system discovery finds one or more predefined bundles such as from an ISP, the Select Bundle Filter screen appears. Otherwise, the deployment process proceeds. -
Page 16: Using The Gui: Local Host Installations
Figure 2-5 Select Items to be Installed Screen For more information about the Select Items to be Installed screen and its sections, see “Selecting components to install” (page 15). Using the GUI: local host installations After first time installations, the HP Smart Update Manager can deploy smart components on a local host or one or more remote hosts. -
Page 17: Selecting Bundles To Filter
Figure 2-6 Select Installation Host(s) Screen – Local Host The Discovery Progress screen appears while the HP Smart Update Manager checks the local system to see which items are already installed. If the system discovery finds one or more predefined bundles such as from an ISP, the Select Bundle Filter screen appears. Otherwise, the Select Items to be Installed screen appears. -
Page 18: Selecting Components To Install
• To view all versions of the products included in the bundle, select ALLOW NON-BUNDLE VERSIONS. This option enables you to include updates that might be newer than those released in the bundle. • To view updates of products not included in the bundle, select ALLOW NON-BUNDLE PRODUCTS. -
Page 19: Status Field
Status field Figure 2-7 Status Field The Status field of the Select Items to be Installed screen displays information about whether the installation is ready to proceed or not. Icon Text Description Ready All selected components are ready to be installed. Already No component installation is required. -
Page 20: Smart Update Manager Installation Log
Status Displays the installation status of the component. Icon Text Description Success The component is installed successfully. The component is not updated since the installed version is already updated - up-to-date. already current Same/older The existing component is successfully downgraded or reflashed to the version same or an older version. -
Page 21: Using The Gui: Multiple-Host Installations
(including errors) for each component installed. The installation log files are located in subdirectories named according to the IP address of each host in the \CPQSYSTEM\log subdirectory on the boot partition of the local host. The directory containing the local host information is stored in \CPQSYSTEM\log\localhost, instead of in the IP address. -
Page 22: Managing Hosts
2. Click Next to continue. 3. Enter the credentials for the host (“Entering credentials for hosts” (page 25)). 4. Click OK to proceed, as described in “Selecting bundles to filter” (page 17). 5. After selecting the bundles to filter, click OK to proceed, as described in “Selecting components to install on multiple hosts”... -
Page 23: Managing Groups
Select the method to add a host from the following: • Enter the DNS name of the host to be added. • Enter the IP address of the host to be added. • Enter the IP address range of the hosts to be added. The starting and ending IP addresses must both be on the same subnet. -
Page 24: Manage Groups Screen
Figure 2-15 Manage Groups Screen To add a group: Click Add Group. The Edit Group dialog box appears. Figure 2-16 Edit Group Screen Enter a group name. Enter an optional user-defined description given to the group to be added. Select the hosts to be added to the group from the available hosts pane. You can add new hosts from this screen by clicking the New Host button. -
Page 25: Entering Credentials For Hosts
To delete a group, select the group on the Manage Groups screen, then click the Delete Group button. Click Yes when the confirmation screen appears. Figure 2-17 Delete Group Confirmation Screen Entering credentials for hosts When a single remote host is selected, the Enter Credentials for Host screen appears. Figure 2-18 Enter Credentials for Host Screen To enter the credentials for the host, choose one of the following: •... -
Page 26: Selecting Bundles To Filter On Multiple Hosts
Figure 2-19 Enter Credentials for Group Screen The screen separates the remaining hosts that still require credentials from the completed hosts. Each pane is divided into the following columns: Name Specifies the name of the host. Status Specifies the credentials status of the host. Icon Text Description... -
Page 27: Selecting Components To Install On Multiple Hosts
Selecting components to install on multiple hosts The Select Items to be Installed screen displays the server hosts and their status information. Figure 2-20 Select Items to be Installed Screen The Select Items to be Installed screen includes the following buttons: View Host Enables you to view additional information about a host after you select it. -
Page 28: Viewing The Installation Results For Multiple Hosts
Figure 2-21 Selections for Host Screen To set single-host selections, proceed as described in "Selecting Components to Install (on page 17)." After setting the single-host selections for all hosts to be updated, click Install on the Select Items to be Installed screen to proceed with the installation. Viewing the installation results for multiple hosts When the installation is complete, the Installation Results screen appears. -
Page 29: Installation Results Screen For Single Host
Icon Text Description Installation The installation was canceled and cannot continue. canceled by user Installation One or more of the component installations failed. Failed The Installation Results screen also includes the following buttons: Enables you to view installation results for the selected host. View Host Exits the HP Smart Update Manager. -
Page 31: Advanced Installation Of Isps In Windows
3 Advanced installation of ISPs in Windows This section addresses advanced installation of ISPs in Windows. Component configuration Component configuration requires that Smart Components are in a write-accessible location. A CD or read-only network share is not supported. If you have obtained your support pack from the SmartSetup CD, copy the entire contents of the support pack directory to the local hard drive or a network share, and then make sure the read-only attributes are cleared from all files. - Page 32 Causes the server (or host server in a remote installation) /r[eboot] to reboot if the following conditions are met: • The /reboot argument has been selected or given as a command line argument. • All components selected for installation were successfully installed.
- Page 33 /b[undle] bundlename | Specifies the bundles to be installed. You can specify bundles with the /b argument or without it. bundlename If you specify the /b argument, you can specify only one bundle at a time. However, you can specify multiple /b arguments and bundles on the same command line.
-
Page 34: Command-Line Examples
Specifies the IP address or the DNS name of a HP /target "netAddress" BladeSystem c-Class Onboard Administrator or remote host. When two Onboard Administrators are in an enclosure, this argument must be the active Onboard Administrator. Enables you to redirect the output from HP Smart Update /logdir "path"... -
Page 35: Return Codes
Return codes HP Smart Update Manager has consolidated the return codes from Windows® components into a new, enhanced return code mapping. These return codes determine the status of the component installation. You can also use return codes in a script to control the execution of the script and determine any required branching. -
Page 37: Troubleshooting
4 Troubleshooting The following issues might be encountered with the Windows ISPs. The issues are in bold and their resolutions follow. • How do I set the rules for Windows Firewall and Security Policy properly? When the Windows Security Alert appears, click Unblock and set your firewall settings to the following: Click Start>Control Panel>Administrative Tools>Windows Firewall with Advanced Security>Inbound Rules>Remote Administration (NP-IN). - Page 38 The HP Smart Update Manager cannot be run in directories containing double-byte characters in the path name. Paths can be created with double-byte characters when using certain versions of the operating system (for example, Japanese or Chinese). • How do I use HP Smart Update Manager over a firewall? Which ports do I need to open? Are they configurable? The port that HP Smart Update Manager uses cannot be configured.
-
Page 39: Technical Support
5 Technical support Reference documentation For an overview of the HP Integrity server family, see http://www.hp.com/go/integrity. For other documents supporting Windows Server 2003 on HP Integrity Servers, see the Windows 64-bit on HP Integrity Servers section at http://docs.hp.com/en/windows.html Operating system information For information about Windows operating systems, see the Microsoft web site at http://www.microsoft.com. - Page 41 Glossary graphical user interface HPSUM HP Smart Update Manager Integrated Lights-Out iLO 2 Integrated Lights-Out 2 Integrity Support Pack network interface controller POST Power-On Self Test RBSU ROM-Based Setup Utility RILOE II Remote Insight Lights-Out Edition II read-only memory serial attached SCSI universal serial bus...