Command Reference Updates - Allied Telesis AT-8600 Release Note

84 L2TP Enhancements
Syntax
Syntax

Command Reference Updates

This section describes each new command and the changed portions of
modified commands and output screens. For modified commands and output,
new parameters, options and fields are shown in bold.
add l2tp ip
ADD L2TP IP=ipadd[-ipadd] PPPTemplate=0..31
[NUMber={OFF|ON|STARTup}] [PRE13={OFF|ON}]
[PROXYAuth={OFF|ON}]
[TOSreflect={OFF|ON|False|True|NO|YES}]
Parameter Description
PROXYAuth Whether the router or switch, acting as an LNS, performs Proxy
Authentication of the PPP user if the LAC provides Authentication
information.
Default: on
ON
OFF
disable l2tp debug
DISable L2TP DEBug={ALL|DECode|PKT|STAte}
[CALL[=1..65535]|TUNnel[=1..65535]]
Parameter Description
DEBug The debugging options to disable on the specified call or tunnel, or on
all calls and tunnels.
Default: no default
DECode
The LNS performs Proxy Authentication.
The LNS does not perform Proxy Authentication.
Decode debugging is disabled. When enabled, this
decodes control messages and payload message
headers into a human-readable format.
Release Note
Software Version 2.8.1
C613-10477-00 REV B