Trap On Vrrp Topology Changes; Traps On Mstp State And Topology Changes - Allied Telesis AT-8600 Release Note

Version 2.8.1
Hide thumbs Also See for AT-8600:
Table of Contents

Advertisement

Software Version 2.8.1
Software Version 2.8.1
C613-10477-00 REV B
ospfNbrAddressLessIndex, the ifIndex of the interface the neighbour is
attached to, for addressless interfaces
ospfNbrRtrId, the router ID of the neighbour
ospfNbrState, the new state of the neighbour
The ospfVirtNbrStateChange trap ({ ospfTraps 3 }) is generated when a
virtual OSPF neighbour changes state, and contains the following objects:
ospfRouterId, the router ID of the originator of the trap
ospfVirtNbrArea, the transit area identifier
ospfVirtNbrRtrId, the router ID of the virtual neighbour
ospfVirtNbrState, the new state of the virtual neighbour

Trap on VRRP topology changes

RFC 2787, Definitions of Managed Objects for the Virtual Router Redundancy
Protocol, defines a portion of the Management Information Base (MIB) for
managing the Virtual Router Redundancy Protocol (VRRP).
Objects defined in this MIB reside in the mib(1) subtree and have the object
identifier prefix vrrpMIB ({ mib-2 68 }).
This software version implements the following trap from the
vrrpNotifications(0) subtree of the VRRP MIB:
The vrrpTrapNewMaster trap ({ vrrpNotifications 1 }) is generated when
the sending agent becomes the new VRRP master, and contains the
following object:
vrrpOperMasterIpAddr, the primary IP address of the new master

Traps on MSTP state and topology changes

The IEEE draft ruzin-mstp-mib-04, defines a portion of the Management
Information Base (MIB) for managing Multiple and Rapid Spanning Tree
Protocols.
Objects defined in this MIB reside in the dot1dBridge subtree defined in
RFC 1493, and have the object identifier mstp ({ mib-2 dot1dBridge(17) 11 }).
This software version implements the following traps from the mstpTraps(0)
subtree of the MIB:
The mstpNewRootBridge trap ({ mstpTraps 1 }) is generated by a bridge
when it is elected as the new root of the Spanning Tree in the CIST or in any
MSTI, and contains the following object:
mstpXstId, the MSTI or CIST instance
The mstpNewRootPort trap ({ mstpTraps 2 }) is generated by a bridge
when it changes the root port of the Spanning Tree in the CIST or in any
MSTI, and contains the following objects:
mstpXstId, the MSTI or CIST instance
mstpXstPortIndex, the index of the port in the mstpPortTable table
The mstpTopologyChange trap ({ mstpTraps 3 }) is generated by a bridge
when any of its configured ports in any instance (CIST or MSTI) transitions
189

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents

Save Article as PDF