Vpn Tunnel Licencing - Allied Telesis AT-8600 Release Note

172 Enhancements to IPsec/VPN
ISAKMP will not reattempt XAUTH authentication failures (phase 1.5).
XAUTH failures indicate that either the router or switch and its peer have
different authentication details, or a third party is attempting to connect to the
router or switch. This needs to be investigated manually.
Command Changes
The following table summarises the modified commands:
Command
create isakmp policy
set isakmp policy
show isakmp counters
show isakmp policy

VPN Tunnel Licencing

By default, the AR415S allows one VPN tunnel. Additional VPN tunnels
require a special feature licence. If you need more VPN tunnels, contact your
authorised distributor or reseller. Other products do not need a special feature
licence for more VPN tunnels.
Command changes
The following table summarises the modified command.
Command
show ipsec
Change
New retryikeattempts parameter.
New retryikeattempts parameter.
New retryIkeAttemptsPh1 and retryIkeAttemptsPh2
parameters in output when counters is set to general.
New usePolIkeRetryGood and usePolIkeRetryFailed
parameters in output when counters is set to spd.
New Retry IKE Attempts, Current IKE Retries, and
Required IKE Retry Phase parameters in the output when
a policy is specified.
Change
New output parameters
Release Note
Software Version 2.8.1
C613-10477-00 REV B