Show Igmp Filter - Allied Telesis AT-8600 Release Note

64 Internet Group Management Protocol (IGMP) Enhancements
Syntax
Description
Figure 14: Example output from the show igmp filter command
IGMP Filters
-------------------------------------------------------------------------------
No. Entry Group Address Range
-------------------------------------------------------------------------------
1 224 224.1.2.3
229 229.1.1.1
Reports - Recd:
Queries - Recd:
Leaves - Recd:
-------------------------------------------------------------------------------

show igmp filter

SHow IGMP FILter[=filter-id]
where:
■
filter-id is a decimal number from 1 to 99.
The output of this command includes new fields.
- 224.1.2.3
- 229.2.2.2
80 Passed:
0 Passed:
2 Passed:
Table 13: New parameters in the output of the show igmp filter command
Parameter Meaning
Msg Type The type of IGMP message being filtered by this entry; one of
"Leave", "Query", or "Report".
Reports, The total number of IGMP messages of the specified type that
Queries, were received and processed on all the switch ports that this filter
Leaves is attached to.
Recd The number of IGMP messages of the specified type that were
received on all the switch ports that this filter is attached to.
Passed The number of IGMP messages of the specified type that were
received and accepted on all the switch ports that this filter is
attached to.
Dropped The number of IGMP messages of the specified type that were
received and discarded on all the switch ports that this filter is
attached to.
Msg Type Action
Report Exclude
Leave Include
70 Dropped:
0 Dropped:
2 Dropped:
Release Note
Matches
10
2
10
0
0
Software Version 2.8.1
C613-10477-00 REV B