Show Ip Counter - Allied Telesis AT-8600 Release Note

Software Version 2.8.1
Syntax
Description
Software Version 2.8.1
C613-10477-00 REV B
Table 16: Parameters in output of the new show ip cache command (cont.)
Parameter
Type
Age
Count

show ip counter

SHow IP
COUnter[={ALL|ARP|CAChe|ICmp|INterface|IP|MUlticast|ROu
tes|SNmp|UDp}]
This command displays all or selected parts of the IP MIB. You can now specify
cache as an option for the counter parameter. If all is specified or no option,
then all IP counters are displayed. The MIB can be selectively displayed by
specifying one of the options in the syntax.
Figure 19: Example output from the show ip counter=cache command
Cache Counters
hits ............... 304
deletes .............. 0
Table 17: Parameters in output of the show ip counter=cache command
Parameter
hits
rejects
deletes
Meaning
One of the following:
Forward
Local
GenBcast
SpcBcast
MultOsp
MultLmtd
MultNorm
MultLocl
Age of the entry, which increases over time, but is reduced
when the entry is used.
Number of times the entry was found.
rejects .............. 0
Meaning
Number of times that an entry was found in the cache.
Number of times that an entry could not be added to the
cache.
Number of entries removed from the cache before they
timed out.
77