Command Reference Updates - Allied Telesis AT-8600 Release Note

18 Command Line Interface (CLI) Enhancements
Syntax
Description
Example

Command Reference Updates

This section describes each new command and the changed portions of
modified commands and output screens. For modified commands and output,
new parameters, options and fields are shown in bold.
create config
CREate CONfig=filename [SET]
This command now lets you set the switch to a configuration file when you
create it. This command still requires a user with security officer privilege
when the router or switch is in security mode.
Parameter Description
CONfig Name of the configuration file or script to create. If one already exists,
it is replaced.
The filename is in the format [device:]filename.ext and can be:
• uppercase and lowercase letters
• digits
• # $ % & ! ' ( ) + , - . ; = @ [ ] ^ _ ` { } ~ and space
device indicates the physical location where the file is stored. The
default is flash.
.ext is an 3-letter extension, such as .txt or .scp.
Invalid characters are * " | \ : ? / < >
Default: no default
SET Sets the switch to use the configuration file or script specified by
filename when the switch boots up again.
To save the current dynamic configuration to a script file called test.cfg, use the
command:
cre con=test.cfg
Release Note
Software Version 2.8.1
C613-10477-00 REV B