Enable Ssh Server - Allied Telesis AT-8600 Release Note

148 Secure Copy (SCP)
Syntax
Description
Example
Syntax
Description
enable ssh debug
ENAble SSH DEBug={SSH|SCP|ALL}
This new command enables the SSH server debugging facility. If ssh is
specified, debugging is turned on for Secure Shell. If scp is specified,
debugging is turned on for Secure Copy. If all is specified, debugging for both
SSH and SCP is turned on. Debugging is disabled by default.
To enable debugging of SCP, use the command:
ena ssh deb=scp

enable ssh server

ENAble SSH SERver HOSTKey=key-id SERVERKey=key-id
[EXPirytime=0..168] [LOGintimeout=1..600]
[SCP={ENAbled|DISabled}]
This command enables the Secure Shell server. The new scp parameter allows
you to enable or disable Secure Copy service for the Secure Shell.
Parameter Description
SCP Whether the SSH server supports SCP connections.
Default: enabled
ENAbled
DISabled
Allows SCP connections
Does not allow SCP connections
Release Note
Software Version 2.8.1
C613-10477-00 REV B