Disable Epsr Debug - Allied Telesis AT-8600 Release Note

22

disable epsr debug

Syntax
Description
Examples
Related Commands
disable epsr debug
DISable EPSR={epsr-name|ALL} DEBug={INFo|MSG|PKT|STAte|
ALL}
This command disables debugging for either the selected EPSR instance, or all
EPSR instances.
Table 1-1: Parameters for the disable epsr debug command
Parameter Description
EPSR The EPSR instance on which debugging is to be disabled.
Default: no default
epsr-name
ALL
Debug The debugging modes to be disabled.
Default: no default
INFo
MSG
PKT
STAte
ALL
To disable all debugging modes on the EPSR instance called blue, use the
command:
dis epsr=blue deb=all
enable epsr debug
show epsr debug
The name of the EPSR instance. This can be a character
string, 1 to 15 characters long. Valid characters are
uppercase letters (A-Z), lowercase letters (a-z), digits (0-9),
the underscore character ("_"), the hyphen character ("-").
The epsr-name cannot be ALL.
All EPSR instances.
General information about EPSR.
Decoded display of received and transmitted EPSR frames.
Raw ASCII display of received and transmitted EPSR frames.
EPSR state transitions.
All debug options.
Software Reference