Displaying Routes Learned From A Specific Bgp Peer - Allied Telesis AT-8600 Release Note

104 BGP Enhancements
Command Changes
The following table summarises the modified commands:
Command
add bgp peer
add bgp peertemplate
set bgp peer
set bgp peertemplate

Displaying Routes Learned from a Specific BGP Peer

This enhancement enables you to display:
■
the number of routes learned from a specific peer
■
information about each route learned from a specific peer instead of all
peers
Displaying the Number of Routes from a Peer
To display the number of routes learned from a specific peer, use the existing
command:
show bgp peer=ipadd
In the output, check the new Routes learned field.
Displaying Information about Routes from a Peer
To display information about each route learned from a specific peer, use the
new peer parameter in the command:
show bgp route[=prefix] [peer=ipadd] [other optional
parameters]
Command Changes
The following table summarises the modified commands:
Command
show bgp route
show bgp peer
Change
New none option for description, inroutemap and
outroutemap parameter
New none option for description, inroutemap and
outroutemap
New none option for description, inroutemap and
outroutemap
New none option for description, inroutemap and
outroutemap
Change
New peer parameter
New Routes learned field
Release Note
Software Version 2.8.1
C613-10477-00 REV B