Ethernet Protection Switching Ring (EPSR)
Syntax
Description
Warning
Related Commands
purge epsr
PURge EPSR
This command destroys all EPSR instances, returning the EPSR module to its
status when it is first powered on.
If the data VLANs of any EPSR instances are still configured in a ring
formation, purging EPSR could cause a loop in the network. To avoid creating
loops, take one or more of these steps before running this command:
disable the ports, using the disable switch port command.
■
unplug the ports.
■
delete the ports from the VLAN, using the delete vlan port command.
■
Examples
To purge all EPSRs, use the command:
pur epsr
create epsr
show epsr
purge epsr
25