Destroy Epsr - Allied Telesis AT-8600 Release Note

20

destroy epsr

Syntax
Description
Examples
Related Commands
destroy epsr
DESTroy EPSR={epsr-name|ALL}
This command destroys the specified EPSR instance, or all EPSR instances.
Before running this command you must first disable the appropriate EPSR
instances by using the disable epsr command on page
their associated data VLANs. To avoid creating loops, take one or more of these
steps before running this command:
disable the ports, using the disable switch port command.
■
unplug the ports.
■
delete the ports from the VLAN, using the delete vlan port command on
■
page 11-113.
Ingress filtering is automatically enabled to ports that are added to EPSR.
Similarly, ingress filtering is automatically disabled on ports used by an EPSR
instance that is destroyed, unless its ports form part of another EPSR ring
instance.
Parameter Description
EPSR The EPSR instance to be destroyed.
Default: no default
epsr-name
ALL
To destroy the EPSR instance called blue, use the command:
dest epsr=blue
create epsr
show epsr
The name of the EPSR instance to be destroyed. The epsr-
name can be a character string, 1 to 15 characters long.
Valid characters are uppercase letters (A-Z), lowercase
letters (a-z), digits (0-9), the underscore character ("_"), the
hyphen character ("-"). The epsr-name cannot be ALL.
All EPSR instances
Software Reference
1-21, and remove all