Disable Epsr - Allied Telesis AT-8600 Release Note

Ethernet Protection Switching Ring (EPSR)
Syntax
Description
Warning
Examples
Related Commands

disable epsr

DISable EPSR={epsr-name|ALL}
This command disables the EPSR protocol for either the specified EPSR
instance, or all EPSR instances.
Disabling a VLAN that is still configured to a ring can cause loops and
subsequent broadcast storms within the network. To avoid creating loops, take
one or more of these steps before running this command:
disable the ports, using the disable switch port command on page 11-131.
■
unplug the ports.
■
delete the ports from the VLAN, using the delete vlan port command.
■
Parameter Description
EPSR The EPSR instance to be disabled.
Default: no default
epsr-name
ALL
To disable the EPSR instance called blue, use the command:
dis epsr=blue
enable epsr
show epsr
The name of the EPSR instance. This can be a character
string, 1 to 15 characters long. Valid characters are
uppercase letters (A-Z), lowercase letters (a-z), digits (0-9),
the underscore character ("_"), the hyphen character ("-").
The epsr-name cannot be ALL.
All EPSR instances.
disable epsr 21