Troubleshooting - Allied Telesis AT-8600 Release Note

76 Internet Protocol (IP) Enhancements
Syntax
Description
Figure 18: Example output from the show ip cache command
IP Address Cache
------------------------------------------------------------------
Entries ................. 284
Max Entries ............. 284
Last Addition ........... 13:54:43 on Tuesday 21-Feb-2006
Last Rejection .......... -
Source
----------------------------------------------------------------------------
10.1.1.2
10.1.1.3
10.1.1.4
10.1.1.5
10.1.1.6
10.1.1.7
10.1.1.8
10.1.1.9
10.1.1.10
10.1.1.11
Table 15: Modified parameters on output of the show ip command.
Arp wait timeout
show ip cache
SHow IP CAChe
This new command displays information about the IP address cache when

troubleshooting.

Destination Interface
192.168.100.3 eth0-1
192.168.100.3 eth0-2
192.168.100.3 eth0-3
192.168.100.3 eth0-4
192.168.100.3 eth0-5
192.168.100.3 eth0-6
192.168.100.3 eth0-7
192.168.100.3 eth0-8
192.168.100.3 eth0-9
192.168.100.3 eth0-10
Table 16: Parameters in output of the new show ip cache command
Parameter
Entries
Max Entries
Last Addition
Last Rejection
Source
Destination
Interface
The amount of time the router or switch waits for a
response after it sends an ARP request message, in
seconds.
Type Age
Forward 1
Forward 1
Forward 1
Forward 1
Forward 1
Forward 1
Forward 1
Forward 1
Forward 1
Forward 1
Meaning
Current number of entries in the cache.
Maximum number of entries in the cache since the router
or switch restarted.
Time and date that the last entry was added to the cache.
Time and date that an entry failed to be added to the cache
(possibly because the cache was full).
Source of the IP address.
Destination of the IP address.
Interface that the IP packet was received on.
Release Note
Count
3
3
3
3
3
3
3
3
3
3
Software Version 2.8.1
C613-10477-00 REV B