Set Ip Interface - Allied Telesis AT-8600 Release Note

Software Version 2.8.1
Example
Syntax
Description
Software Version 2.8.1
C613-10477-00 REV B
To set the maximum time period allowed between successive IGMP general
query messages on interface vlan2 to 120 seconds, use the command:
set ip igmp int=vlan2 query=120

set ip interface

SET IP INTerface=interface [ADVertise={YES|NO}]
[PREferencelevel={-2147483648..2147483647|NOTDEFAULT}]
[BROadcast={0|1}]
[DIRectedbroadcast={False|NO|OFF|ON|True|YES}]
[FILter={0..999|NONE}] [FRAgment={NO|OFF|ON|YES}]
[GRAtuitousarp={ON|OFF}] [GRE={0..100|NONE}]
[IGMPProxy={OFF|UPstream|DOWNstream}]
[INVersearp={ON|OFF}] [IPaddress=ipadd|DHCP]
[MASK=ipadd] [METric=1..16]
[MULticast={BOTH|OFF|ON|RECeive|SENd}]
[OSPFmetric=1..65534|DEFAULT]
[POLicyfilter={0..999|NONE}]
[PRIorityfilter={0..999|NONE}]
[PROxyarp={False|NO|OFF|ON|True|YES|STrict|DEFRoute}]
[RIPMetric=1..16] [SAMode={Block|Passthrough}]
[VJC={False|NO|OFF|ON|True|YES}]
[VLANPRiority={0..7|None}] [VLantag={1..4094|None}]
where:
■
interface is an interface name formed by concatenating a Layer 2 interface
type, an interface instance, and optionally a hyphen followed by a logical
interface number from 0 to 15. If a logical interface is not specified, 0 is
assumed.
■
ipadd is an IP address in dotted decimal notation.
The new igmpproxy parameter specifies the status of IGMP proxying for the
specified interface. If you specify off, the interface does not do IGMP Proxy. If
you specify upstream, the interface passes IGMP messages in the upstream
direction. A router or switch can have one interface with the IGMP proxy
direction equal to upstream. If you specify downstream, the interface can
receive IGMP messages from the downstream direction. The default is off. To
display information about IGMP and multicast group membership for each IP
interface, use the show ip igmp command.
63