Stp Enhancement; Command Reference Updates - Allied Telesis AT-8600 Release Note

Version 2.8.1
Hide thumbs Also See for AT-8600:
Table of Contents

Advertisement

Software Version 2.8.1
Syntax
Description
Figure 12: Example output from the show stp port rstpstate command
RSTP State Information
---------------------------------------------------------------------------
STP Name: default
Bridge Level State Machine ............ STATE
Port Role Selection ................. Role Selection
Port .................................. 1
Port State Machines ................. STATE
Port Information .................... Disabled
Port Role Transitions ............... Blocked Port
Port State Transition ............... Discarding
Topology Change ..................... Inactive
Port Protocol Migration ............. Init
Port Transmit ....................... Idle
Port .................................. 2
Port State Machines ................. STATE
Port Information .................... Disabled
Port Role Transitions ............... Blocked Port
Port State Transition ............... Discarding
Topology Change ..................... Inactive
Port Protocol Migration ............. Init
Port Transmit ....................... Idle
.
.
.
Software Version 2.8.1
C613-10477-00 REV B

STP Enhancement

You can now display the RSTP states for one or more ports by using the
existing command:
show stp port={port-list|all} rstpstate
The information for each port now starts with the port number. This makes the
output more readable.
Command Changes
The following table summarises the modified command:
Command
show stp port

Command Reference Updates

This section describes the changed portions of modified commands and output
screens. For modified commands and output, the new parameters, options,
and fields are shown in bold.
show stp port
SHow STP[={stp-name|ALL}] POrt={port-list|ALL} RSTPstate
The output of this command includes a new field.
Table 11: New parameters in the output of the show stp port rstpstate command
Parameter
Meaning
Port
The number of the port for which state information is displayed.
Change
New Port field in output
51

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents

Save Article as PDF