Show Epsr - Allied Telesis AT-8600 Release Note

28

show epsr

Syntax
Description
show epsr
SHOW EPSR[={epsr-name|ALL}]
This command displays information about the specified EPSR instance, or all
EPSR instances on the switch
Parameter Description
EPSR The EPSR instance whose details are displayed.
Default: all
epsr-name
ALL
Figure 1-13: Example output from the show epsr command
EPSR Information
--------------------------------------------
Name .......................... blue
Mode .......................... Master
Status ........................ Enabled
State ......................... Complete
Control VLAN .................. vlan2 (2)
Data VLAN(s) ...................vlan100 (100)
Primary Port .................. 1
Primary Port Status ........... Forwarding
Secondary Port ................ 2
Secondary Port Status ......... Blocked
Hello Time .................... 1 s
Failover Time ................. 2 s
Ring Flap Time ................ 0
Trap .......................... Enabled
Name .......................... red
Mode .......................... Transit
Status ........................ Enabled
State ......................... Links-Up
Control VLAN .................. vlan3 (3)
Data VLAN(s) .................. vlan103 (103)
First Po rt .................... 1
First Port Status ..............Forwarding
First Port Direction .......... Upstream
Second Port ................... 2
Second Port Status ............ Forwarding
Second Port Direction ......... Downstream
Trap .......................... Enabled
Master Node ................... 00-00-cd-11-b1-b4
-----------------------------------------------------------
(Figure 1-13, Table 1-2).
The name of the EPSR instance. This can be a character
string, 1 to 15 characters long. Valid characters are
uppercase letters (A-Z), lowercase letters (a-z), digits (0-9),
the underscore character ("_"), the hyphen character ("-").
The epsr-name cannot be ALL.
All EPSR instances.
vlan101 (101)
vlan102 (102)
Software Reference