Extension To Range Of Classifier Fields For X900 Switches; Command Reference Updates - Allied Telesis AT-8600 Release Note

Software Version 2.8.1
Software Version 2.8.1
C613-10477-00 REV B
Extension to Range of Classifier fields for
x900 Switches
This Software Version introduces the ability to match on more fields of an IPv4
packet. A number of new parameters have been added to Classifier commands
to allow this.
Command Changes
The following table summarises the modified commands:
Command
create classifier
set classifier
show classifier

Command Reference Updates

This section describes the changed portions of modified commands and output
screens. The new parameters and options are shown in bold for modified
commands.
Change
New parameters: macsmask, macdmask, tcpflags,
icmptype, icmpcode, igmptype, eipbyte01 -16.
New parameters: macsmask, macdmask, tcpflags,
icmptype, icmpcode, igmptype, eipbyte01 -16..
New input parameters: macsmask, macdmask,
tcpflags, icmptype, icmpcode, igmptype,
eipbyte01 -16.
New output parameters: TCP Flags, ICMP Code,
ICMP Type, TGMP Type, Layer 3 Byte 01 - 16.
117