Configuring A User Profile; User Profile Configuration Task List; Creating A User Profile - HP 10500 Series Configuration Manual

Configuring a user profile

A user profile provides a configuration template to save predefined configurations, such as a QoS policy.
Different user profiles are applicable to different scenarios.
The user profile implements service applications on a per-user basis. Every time a user accesses the
device, the device automatically applies the configurations in the user profile that is associated only with
this user.
User-based traffic policing is more flexible than interface-based traffic policing. In interface-based traffic
policing, if a user moves between ports to access a device, you must remove the policy from the previous
port and then configure the same policy on the port being used to restrict user behaviors. The
configuration task is tedious and error prone.
The user profile supports working with 802.1X and portal authentications and restricts authenticated
users' behaviors as follows:
1. After the authentication server verifies a user, the server sends the device the name of the user
profile associated with the user.
If the profile is enabled, the device applies the configurations in the user profile, and allows user
access based on all valid configurations.
If the user profile is disabled, the device denies the user access.
2. After the user logs out, the device automatically disables the configurations in the user profile, and
the restrictions on the user access are removed.

User profile configuration task list

Task

Creating a user profile

Applying a QoS policy
Enabling a user profile
Creating a user profile
Before you create a user profile, complete the following tasks:
Configure authentication parameters on the device.
•
Perform configurations on the client, the device, and the authentication server.
•
To create a user profile:
Step
1. Enter system view.
2. Create a user profile,
and enter its view.
Command
system-view
user-profile profile-name
188
Remarks
Required.
Required.
Required.
Remarks
N/A
You can use the command to enter the view of
an existing user profile.