Disabling The Isns Client Service; Clearing The Isns Client Configuration - HP A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual

Disabling the iSNS client service

When the iSNS client service is disabled, the DD and DDSets are kept in the fabric.
1. Connect and log in to the switch.
2. Issue the fosConfig --disable isnsc command to disable the iSNS client service:
switch:admin> fosconfig --disable isnsc
3. Issue the fosConfig --show command to verify that the service is disabled:
switch:admin> fosconfig --show
FC Routing service:disabled
iSCSI service:enabled
iSNS Client service:disabled

Clearing the iSNS client configuration

The iSNS client configuration can be cleared with a single command.
1. Connect and log in to the switch.
2. Issue the isnscCfg --clear command to clear the iSNS configuration:
switch:admin> isnsccfg --clear
Cleared iSNS server IP address
Fabric OS 6.1.x administrator guide 283