Inter-Chassis Link (Icl) Licensing; 8-Gbps Licensing - HP A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual

Table 4 License requirements
Feature
QoS
RADIUS
RBAC
Routing traffic
Security
SNMP
SSH public key
Top Talkers
Traffic Isolation
Trunking
Two-factor
authentication
Two-to-four domains in
a fabric
USB usage
Web Tools
Zoning

Inter-Chassis Link (ICL) licensing

ICL ports can be used only with an ICL license. After the addition or removal of a license, the license
enforcement is performed on the ICL ports only when the portdisable and portenable commands
are issued on the ports. An ICL license must be installed on both DC Directors forming the ICL connection.

8-Gbps licensing

IMPORTANT:
The 8-Gbps licensing applies to the 8-Gbps SAN Switches. The following are the basic rules for using,
adding, or removing 8-Gbps licenses.
• Without an 8-Gbps license, even if there is an 8-Gbps SFP plugged into a port in an applicable
platform, the port would be enabled only to run at a maximum speed of 4-Gbps.
• To obtain an 8-Gbps license, only the License ID from the switch is required. When you add the 8-Gbps
license, a portdisable and portenable on each individual port on the switch, or a switchdisable and
switchenable, must be performed to enable the 8-Gbps functionality.
38 Standard features
License
Adaptive Networking
No license required.
No license required.
No license required.
This includes port-based or
exchanged-based routing, static routes,
frame-order deliver, and dynamic routes.
No license required.
Includes the DCC, SCC, FCS, IP Filter, and
authentication policies.
No license required.
No license required.
Advanced Performance Monitoring
No license required.
ISL Trunking or
ISL Trunking Over Extended Fabrics
No license required.
Value Line (Two/Four)
No license required.
No license required.
No license required.
This license is installed by default. Do not remove it under any circumstances.
Where license should be
installed
Local switch and attached
switches.
n/a
n/a
n/a
n/a
n/a
n/a
Local switch and attached
switches.
n/a
Local and attached switches.
n/a
Local switch. May be required on
attached switches.
n/a
Local and any switch you want to
manage using Web Tools.
Local and attached switches; or
any switch you want to use in a
zone.