Trunking Over Extended Fabrics; Trunking Distances; Trunking Support For San Switch 4/32, 4/32B And 4/64 San Switch (Condor Asic) - HP A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual

Hp storageworks fabric os 6.1.1 administrator guide (5697-0235, december 2009)
Hide thumbs Also See for A7533A - Brocade 4Gb SAN Switch Base:
Table of Contents

Advertisement

Use the trunkShow command to display the following information about ISL Trunking groups:
Trunking Group Number Displays each trunking group on a switch. All the ports that are
Port-to-port connections, Displays the port-to-port trunking connections.
WWN
Domain
Deskew
Master
To display trunking information:
1.
Connect to the switch and log in as admin.
2.
Issue the trunkShow command:
This example shows three trunking groups (1, 2, and 3); ports 1, 4, and 14 are masters:
switch:admin> trunkshow
1: 1 ->
0 ->
2: 4 ->
5 ->
7 ->
6 ->
3:14 -> 14
15 -> 15

Trunking over Extended Fabrics

In addition to the criteria listed in
for trunking over Extended Fabrics:
ISL Trunking over Extended Fabrics is supported on switches running Fabric OS 4.4.0 and later.
Extended Fabrics and ISL Trunking licenses are required on all participating switches.
The vc_translation_link_init parameter must be set the same on all ports in an extended fabric. When
you issue the portCfgLongDistance --vc_translation_link_init command, specify 1 to
activate long-distance link initialization sequence; specify 0 to deactivate this mode. If you run the
command without specifying a value, 1 is assigned automatically for the long-distance link in VC_RDY
flow control; otherwise, 0 is assigned. For a long-distance link not configured for ISL R_RDY mode, this
parameter must be set to 1; otherwise, it must be reset to 0.

Trunking distances

Enhanced trunking support for switches with Condor ASICs is summarized in
Table 79

Trunking support for SAN Switch 4/32, 4/32B and 4/64 SAN Switch (Condor ASIC)

Mode
LE
LD
LD
LD
374 Administering ISL trunking
part of this trunking group are displayed.
Displays the WWN of the connected port.
Displays the domain IDs of the switches directly connected to the
physical ports.
The time difference, in nanoseconds divided by 10, for traffic to
travel over each ISL as compared to the shortest ISL in the group).
The system automatically sets the minimum deskew value of the
shortest ISL to 15.
Displays whether this trunking port connection is the master port
connection for the trunking group.
1
10:00:00:60:69:04:10:83
0
10:00:00:60:69:04:10:83
4
10:00:00:60:69:04:01:94
5
10:00:00:60:69:04:01:94
7
10:00:00:60:69:04:01:94
6
10:00:00:60:69:04:01:94
10:00:00:60:69:04:10:83
10:00:00:60:69:04:10:83
"Standard trunking
Distance
Number of 2 Gbps ports
10 km
32 (four 8-port trunks)
200 km
3 (one 3-port trunk)
250 km
3 (one 3-port trunk)
500 km
0
deskew 16 Master
deskew 15
deskew 16 Master
deskew 15
deskew 17
deskew 16
deskew 16 Master
deskew 15
criteria" on page 368, observe the following criteria
Table
Number of 4 Gbps ports
32 (four 8-port trunks)
0
0
0
79.

Advertisement

Table of Contents
loading

Table of Contents