HP A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual page 207

where:
aliasname The name of the zone alias to be created.
member A member or list of members to be added to the alias. An alias member
can be specified by one or more of the following methods:
• A domain,port pair.
• Device node or device port WWN
3. Issue the cfgSave command to save the change to the defined configuration.
switch:admin> alicreate "array1", "2,32; 2,33; 2,34; 4,4"
switch:admin> alicreate "array2", "21:00:00:20:37:0c:66:23; 4,3"
switch:admin> alicreate "loop1", "4,6"
switch:admin> cfgsave
You are about to save the Defined zoning configuration. This
action will only save the changes on the Defined configuration.
Any changes made on the Effective configuration will not
take effect until it is re-enabled.
Do you want to save Defined zoning configuration only? (yes, y, no, n): [no] y
To add members to an alias:
1. Connect to the switch and log in as admin.
2. Issue the aliAdd command with the following syntax:
aliadd "aliasname", "member[; member...]"
where:
aliasname The name of the zone alias.
member A member or list of members to be added to the alias. An alias member
can be specified by one or more of the following methods:
• A domain,port pair.
• Device node or device port WWN
3. Issue the cfgSave command to save the change to the defined configuration.
switch:admin> aliadd "array1", "1,2"
switch:admin> aliadd "array2", "21:00:00:20:37:0c:72:51"
switch:admin> aliadd "loop1", "5,6"
switch:admin> cfgsave
You are about to save the Defined zoning configuration. This
action will only save the changes on the Defined configuration.
Any changes made on the Effective configuration will not
take effect until it is re-enabled.
Do you want to save Defined zoning configuration only? (yes, y, no, n): [no] y
\
To remove members from an alias:
1. Connect to the switch and log in as admin.
2. Issue the aliRemove command with the following syntax:
aliremove "aliasname", "member[; member...]"
Fabric OS 6.1.1 administrator guide 207