HP A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual page 146
Hp storageworks fabric os 6.1.1 administrator guide (5697-0235, december 2009)
Hide thumbs
Also See for A7533A - Brocade 4Gb SAN Switch Base:
- Administrator's manual (576 pages) ,
- Hardware reference manual (256 pages) ,
- User manual (248 pages)
Table of Contents
Advertisement
4.
Respond to the prompts as follows:
Protocol (scp
or ftp)
Server Name
or IP Address
User name
File name
Password
The following example shows configUpload run on a switch without Admin Domains:
switch:admin> configupload
Protocol (scp or ftp) [ftp]: ftp
Server Name or IP Address [host]: 192.1.2.3
User Name [user]: JohnDoe
File Name [config.txt]: /pub/configurations/config.txt
Password: xxxxx
configUpload complete: All config parameters are uploaded.
switch:admin>
The following example shows configUpload run on a switch with Admin Domains:
NOTE:
AD domains other than AD255 upload a subset of information. If a you want a complete switch
configuration, you need to perform configupload logged into AD255.
switch:AD5:admin> ad --select 5
switch:AD5:admin> configUpload
Protocol (scp or ftp) [ftp]:
Server Name or IP Address [host]: 10.1.2.3
User Name [user]: JohnDoe
File Name [config.txt]: /pub/configurations/config.txt
Password: xxxxx
configUpload complete: Only zoning parameters are uploaded from ad5.
swtich:AD5:admin>
5.
Store a soft copy of the switch configuration information in a safe place for future reference.
NOTE:
The configuration file is printable, but you may want to see how many pages will be printed
before you send it to the printer.
146 Maintaining the switch configuration file
If your site requires the use of Secure Copy, specify SCP. Otherwise, specify
FTP. If you leave it blank, the default specified in [ ] is used.
Enter the name or IP address of the server where the file is to be stored; for
example, 192.1.2.3. You can enter a server name if DNS is enabled. For
details about the dnsConfig command, see the Fabric OS Command
Reference.
Enter the user name of your account on the server; for example, JohnDoe.
Specify a file name for the backup file; for example, config.txt. Absolute
path names can be specified using a forward slash (/). Relative path
names create the file in the user's home directory on UNIX servers, and in
the directory where the FTP server is running on Windows servers.
Enter your account password for the server. Note that this is a required field
even if you are logged in as an anonymous user; in such cases, the value
may be ignored by the FTP service.
Advertisement
Table of Contents
