Configuring Option 184 Parameters For The Client With Voice Service; Configuring The Tftp Server And Bootfile Name For The Client - HP A7500 Series Configuration Manual

Follow these steps to configure the gateways in the DHCP address pool:
To do...
Enter system view
Enter DHCP address pool view
Specify gateways
Configuring Option 184 parameters for the client with voice
service
To assign voice calling parameters along with an IP address to DHCP clients with voice service, you must
configure Option 184 on the DHCP server. For more information about Option 184, see the chapter
"DHCP overview."
Follow these steps to configure option 184 parameters in the DHCP address pool:
To do...
Enter system view
Enter DHCP address pool view
Specify the IP address of the primary
network calling processor
Specify the IP address of the backup
network calling processor
Configure the voice VLAN
Specify the failover IP address and
dialer string
NOTE:
Specify an IP address for the network calling processor before performing other configurations.

Configuring the TFTP server and bootfile name for the client

For the DHCP server to support client auto-configuration, you must specify the IP address or name of a
TFTP server and the bootfile name in the DHCP address pool. You do not need to perform any
configuration on the DHCP client.
The DHCP client uses these parameters to contact the TFTP server and request the configuration file used
for system initialization.
Use the command...
system-view
dhcp server ip-pool pool-name
[ extended ]
gateway-list ip-address&<1-8>
Use the command...
system-view
dhcp server ip-pool pool-name
[ extended ]
voice-config ncp-ip ip-address
voice-config as-ip ip-address
voice-config voice-vlan vlan-id
{ disable | enable }
voice-config fail-over
ip-address dialer-string
43
Remarks
—
—
Required
No gateway is specified by
default.
Remarks
—
—
Required
Not specified by default.
Optional
Not specified by default.
Optional
Not configured by default.
Optional
No failover IP address or dialer
string is specified by default.