Downloading Configuration Files With Active=Saved Mode Disabled - HP A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual

The IPL will not be replaced because Active=Saved mode is enabled. A warning message is displayed in
the event log to warn users that the IPL will not be overwritten.

Downloading configuration files with Active=Saved mode disabled

See "Maintaining the switch configuration file" on page 145 for more information on the configDownload
command.
The contents of existing files saved on the switch, which are also present in the FICON_CUP section, are
overwritten.
The files in the FICON section of the configuration file, which are not currently on the switch, are saved on
the switch.
The IPL is replaced because Active=Saved mode is disabled.
Fabric OS 6.1.x administrator guide 437