Assigning A User To An Admin Domain - HP A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual

If you specify AD name = AD15 and the lowest available AD number is 6, AD name is AD15 and AD
number is 15. Because the specified name is in the format ADn, the AD number is assigned to be n and
not the lowest available AD number.
The Admin Domain name cannot exceed 63 characters and can contain alphabetic and numeric
characters. The only special character allowed is an underscore ( _ ).
When you create an Admin Domain, you must specify at least one member (switch, switch port, or device).
You cannot create an empty Admin Domain. For more information about these member types, see
Domain member
Create Admin Domains in the transaction buffer. You can either save the newly created Admin Domain to
a defined configuration or make it the effective Admin Domain configuration directly.
The following procedures describe the steps for creating Admin Domains.
To create an Admin Domain:
1. Log in as the physical fabric administrator to an AD-aware switch in the fabric.
2. Set the default zone mode to No Access, if you have not already done so.
See "To set the default zone
3. Switch to the AD255 context, if you are not already in that context:
ad --select 255
4. Issue the ad
the -s option to specify switch members:
ad --create ad_id -d "dev_list" -s "switch_list"
where ad_id is the Admin Domain name or number, dev_list is a list of device WWNs or domain,port
members, and switch_list is a list of switch WWNs or Domain IDs.
5. Issue the appropriate command, based on whether you want to save or activate the Admin Domain
definition:
• To save the Admin Domain, issue the ad --save command.
• To save the Admin Domain definition and directly apply the definition to the fabric, issue the ad
--apply command.
The following example creates Admin Domain AD1, consisting of two switches, which are designated
by Domain ID and switch WWN.
switch:AD255:admin> ad --create AD1 -s "97; 10:00:00:60:69:80:59:13"
The following example creates Admin Domain blue_ad, consisting of two switch ports (designated by
domain,index), one device (designated by device WWN), and two switches (designated by Domain
ID and switch WWN).
switch:AD255:admin> ad --create blue_ad –d "100,5; 1,3; 21:00:00:e0:8b:05:4d:05;
–s "97; 10:00:00:60:69:80:59:13"

Assigning a user to an Admin Domain

After you create an Admin Domain, you can specify one or more user accounts as the valid accounts who
can use that Admin Domain. User accounts have the following characteristics with regard to Admin
Domains:
• A user account can have only a single role.
You can choose roles from one of the seven types of roles, either the existing user and administrator role
or one of the other RBAC roles.
• You can configure a user account to have access to the physical fabric through AD255 and to a list of
Admin Domains (AD0–AD254).
• You can configure a user account to have access to only a subset of your own Admin Domain list. Only
a physical fabric administrator can create another physical fabric administrator user account.
• Users capable of using multiple Admin Domains, can designate one of these Admin Domains as the
home Admin Domain, which is the default Admin Domain context after login.
types" on page 158.
mode:" on page 162 for instructions.
create command using the -d option to specify device and switch port members and
--
Fabric OS 6.1.1 administrator guide 163
"Admin