Advertisement
Choosing a Place for the Printer
EN
Instructions for Placing the Printer
Leave adequate room as shown in the table for setting up the printer.
❏
Choose a level and stable location that can support the weight of the printer (about 204 kg).
❏
Use only an outlet that meets the power requirements of this printer.
❏
Operate the printer under the following conditions:
❏
Temperature: 15 to 35°C (59 to 95°F)
Humidity: 20 to 80% without condensation
Even the conditions above are met, you may not print properly if the environmental conditions
❏
are not proper for the paper. See the instructions of the paper for more detailed information.
Keep the printer away from drying, direct sunlight, or heat sources to maintain the appropriate
❏
humidity.
TC
選擇放置印表機的位置
放置印表機的說明
❏
❏
請依照圖示，在桌面上預留足夠的空間以設置印表機。
❏
請選擇可支撐印表機重量❏( 約
204 公斤 )❏並且又平坦又穩固的位置。
❏
❏
僅使用符合此印表機電源規格的電源插座。
❏
❏
請在下列條件下操作印表機：
❏
-❏ 溫度：15 至 35°C (59 至 95°F)
-❏ 濕度：20 至 80% 無凝結
❏
即使符合了上述條件，但如果環境條件不適合紙張，還是可能無法正確列印。詳細資料，請
❏
查看紙張的操作說明。
❏
避免將印表機放在過於乾燥、陽光直射、或高溫之處以維持適當的濕度。
❏
3
Advertisement
