Epson LX-310 Start Here

Start Here

Unpacking

1

Assembling the Printer

2
Pull upright and push firmly
Attach
Remove
Push and
hold up
Remove the paper tension unit
Insert the ribbon
between the print
head and carriage
Insert until it clicks
It may come attached to the printer in some countries.
The shape of the plug may vary by location.
Remove
Attach
Make sure that all of the
protective materials in the
printer are removed
Do not touch the white cable
inside the printer
Tense the ribbon
Confirm the print head is in the middle
Caution:
c
Do not insert the ribbon on the far
side of the carriage.
<correct>
Tense
carriage
Attach the paper tension unit

Connecting the Power Cord

3
Open
Confirm the (OFF)

Connecting the Printer to Your Computer

4 Caution:
c
❏ The interface cable connectors have only one correct orientation. Make sure the orientation of the connector is correct
before inserting it into the appropriate port.
❏ Do not connect or disconnect the printer while it is turning on.
IEEE1284 (PARALLEL)
<incorrect>
Continued
Hook and push
Attach
Close
Connect
Plug in
USB
Connect firmly
Connect firmly
Connect firmly
Connect firmly and
fasten
Continued on back