Enterprise Fabric Mode Dialog Box; Switch Binding - State Change Dialog Box - HP 316095-B21 - StorageWorks Edge Switch 2/24 Planning Manual

Figure 52: Enterprise Fabric Mode Dialog Box
7. Verify FICON devices are still logged in — Maximize the Element
8. Change switch binding enforcement if required — If the SAN
Figure 53: Switch Binding - State Change Dialog Box
SAN High Availability Planning Guide
b. Select the fabric to be configured from the Fabric Name drop-down list.
The selected fabric's status displays in the Enterprise Fabric Mode field.
c. Click Activate to close the dialog box and enable Enterprise Fabric
Mode for the selected fabric.
Manager application. Inspect the Node List View
FICON devices (channels and control units inspected in
logged in to each director or switch.
environment is volatile (characterized by a high volume of optical cable
connects, disconnects, and movement), change switch binding enforcement to
restrict E_Ports only.
a. In the Element Manager application, click the Hardware tab. In the
Hardware View, select Switch Binding, and then select Change State
from the Configure menu. The Switch Binding - State Change dialog
box displays (Figure
Planning Considerations for Fibre Channel Topologies
53).
(Figure 51) and verify
step 5) are still
129