Periodically Synchronize Date And Time; Frequently Used Hafm Settings - HP StorageWorks Installation Manual
Edge switch 2/24, fw 07.00.00/hafm sw 08.06.00
Hide thumbs
Also See for StorageWorks:
- User manual (204 pages) ,
- Reference manual (54 pages) ,
- Getting started manual (52 pages)
Table of Contents
Advertisement
Periodically Synchronize date and time
To set the switch to periodically synchronize date and time with the HAFM application:
1.
Click Periodic Date/Time Synchronization to select the option (check mark in the box). The Date
and Time fields are greyed out and not selectable. Perform one of the following options:
• Click Activate to enable synchronization and close the Configure Date and Time dialog box.
The switch date and time synchronize with the HAFM application date and time at the next
update period (at least once daily).
• Click Sync Now to synchronize the switch and HAFM application immediately. The Date and
Time Synced dialog box is displayed.
2.
Click OK to synchronize the date and time and close the Date and Time Synced dialog box, then
click Activate to enable synchronization and close the Configure Date and Time dialog box.
Frequently used HAFM settings
This section summarizes the most common HAFM tasks, including:
NOTE:
For a complete reference on HAFM functionality, refer to the HP StorageWorks HA-Fabric
Manager user guide.
Edge Switch 2/24 installation guide
43
Advertisement
Table of Contents
Need help?
Do you have a question about the StorageWorks and is the answer not in the manual?