Configuring the Switch
Configure Open Systems Management Server
Use these procedures to configure the open systems inband management program
to function with the switch.
Note:
order to perform this procedure.
To configure the Open Systems Management Server, use the following steps:
1. Select Management Server from the Configure menu on the menu bar.
2. Enable the management server by clicking the Enable Management Server
3. Click the check box in the Host Control Prohibited field to display a check
4. Activate changes and close the dialog box by clicking Activate.
5. If you are finished configuring the switch, you can backup the configuration
118
The optional Open Systems Management Server feature must be enabled in
The Configure Open Systems Management Server dialog box displays.
check box to add a check mark. (To disable the management server, click the
check box again to remove the check mark.)
mark and prohibit a host management program from changing configuration
and connectivity parameters on the switch. In this case, the host program has
read-only access to configuration and connectivity parameters. Clicking the
check box when it contains a check mark removes the check mark and allows
a host program to change configuration and connectivity parameters on the
switch.
data. For more information, refer to
page 162.
"Backup and Restore
Edge Switch 2/24 Product Manager User Guide
Configuration" on