Figure 6.3 Replacing The Tape Drive; Figure 6.4 Rear Of The Tape Drive; Figure 6.5 Releasing The Tape Drive - Tandberg Data STORAGELOADER Installation And User Manual
Compact tape cartridge loader
Hide thumbs
Also See for STORAGELOADER:
- Installation and user manual (89 pages) ,
- Quick installation manual (15 pages) ,
- Quick installation manual (15 pages)
Table of Contents
Advertisement
Tandberg Data
For replacing the tape-drive, switch off the loader,
disconnect the power cord and remove these two
screws and the back-panel cover plate.
Figure 6.3 Replacing the tape drive
You now have access to the rear of the tape-drive and can
dismount the SCSI cable, the ADI cable and the power cable.
Figure 6.4 Rear of the tape drive
Figure 6.5 Releasing the tape drive
StorageLoader Installation and User Manual
SCSI cable
ADI Cable
Maintenance
Power connector
Release the tape-drive by
pushing the spring against
the gripper-plate and
pulling the drive carefully
backwards
.
61
- Quick Links:
- Models
- Set Password
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the STORAGELOADER and is the answer not in the manual?
Questions and answers