Setup Menu; Storageloader Setup - Tandberg Data STORAGELOADER Installation And User Manual

Tandberg Data
Utilities Selects a set of the loader and drive maintenance
and diagnostic functions. The loader must be idle to
make this entry selectable.
See chapter Utilities Menu for more details.
The Main m enu can be select ed even if t he loader is not in t he idle
st at e. While in t he m ain m enu, t he loader will accept and execut e
SCSI com m ands. When any of t he m ain m enu ent ries except t he
View Dat a ent ry is select ed, t he loader will go t o it 's busy st at e
and SCSI com m ands will be t erm inat ed wit h Check Condit ion and
Not Ready status.

4.4 Setup Menu

To ent er t his m enu, scroll t o t he Set up it em in t he Main Menu and
press t he Select but t on. The loader ent ers t he busy st at e when
this menu is selected.
Item name
StorageLoader
setup
SCSI setup
Remote
Management
setup

4.4.1 StorageLoader setup

The num ber of select able values for each St orageLoader set t ing
are listed in the following table.
Item name
Cleaning Slot
Barcode scan*
Audible Alarm
Set Language
* Can be enabled only if a barcode scanner is installed. The barcode of the
cartridge in each occupied magazine slot and in the drive (if any) will then
be scanned during the Inventory process.
StorageLoader Installation and User Manual
Description
This m enu it em
StorageLoader setup menu.
This m enu it em gives access t o t he SCSI bus
set up m enu. Bot h t he St orageLoader and t he
Drive SCSI bus setup are available here.
This m enu it em gives access t o t he Rem ot e
Managem ent set up
operat or t o enable, disable and configure t he
Loader Web interface.
Legal values.
Legal Slot ID 1..8 or 0 =
not selected.
Enabled, Disabled
Enabled, Disabled
English
Operation and Configuration
gives access t o
m enu. I t allows
Default value
0 = not selected
Enabled
Disabled
English
t he
t he
35