Figure 3.1 Rack Mounting Kit - Tandberg Data STORAGELOADER Installation And User Manual

Tandberg Data
Folding rule or tape measure
Screwdriver
7 mm open- end wrench
Note: The rails are m ount ed t o t he loader during t ransport at ion.
Before mounting the rails into the rack, dismount the rails from the
loader and remove the spacers between the rails and the loader.
Back
Rail Left Assembly

Figure 3.1 Rack Mounting kit

Installing the Rack Mounting Kit
Determine the proper position of the rails in the rack.
Caution: Consider rack st abilit y when deciding where t o place t he
St orageLoader, hazardous condit ions can be t he result of uneven
mechanical loading of a rack.
16
Operation and Configuration
Rail Right Assembly
StorageLoader Installation and User Manual
Front