Figure 7.2 Example Of Detailed Information; Figure 7.3 Example Of Further Detailed Information; Figure 7.4 Example Of Action; Figure 7.5 Warning Message Concerning Reboot - Tandberg Data STORAGELOADER Installation And User Manual

Tandberg Data

Figure 7.2 Example of detailed information

Figure 7.3 Example of further detailed information

In this example, pressing "Back" twice takes you back to the Error
Code Page (figure 7.1) where you can press "Actions" to go to the
Actions menu. Figure 7.4 shows an example of pressing "Actions".
Pressing the buttons next to the up/down arrows on the screen gives
you access to other action options.

Figure 7.4 Example of action

In figure 7.4, you have been prompted to reboot the Loader. Pressing
"Select" will result in the warning message shown in figure 7.5. Press
"Ok" to execute the reboot.

Figure 7.5 Warning message concerning reboot

When an error condition occurs, identify the problem using the
displayed error codes and follow the suggested actions. The error
codes are listed in the next section.
StorageLoader Installation and User Manual
If the problem
persists please call
technical support.
?
Reboot
?
You are about to
reboot the loader
AND the drive !
Cancel
Back
Exit
Select
Ok
Maintenance
81