Fru Drive Tray Assy 420Lto; Figure 6.8 Replacing The Tape Drive - Tandberg Data STORAGELOADER Installation And User Manual

Tandberg Data
Snap the front bezel that was removed from the replacement-
drive onto the front of the defective drive. Then pack the
defective drive in the same box you received the replacement-
drive and return it to your support center.
6.5.2 FRU Drive Tray Assy 220LTO and 420LTO
The 220LTO drive FRU consists of the following parts:
007171 StorageLoader FRU Drive Tray Assy 220LTO
Item Description
1 220LTO Bare Drive SCSI
2 Quick Installation guide FRU Drive Tray Assy
220LTO
The 420LTO drive FRU consists of the following parts:
006979 StorageLoader FRU Drive Tray Assy 420LTO
Item Description
1 420LTO Bare Drive SCSI
2 Quick Installation guide FRU Drive Tray Assy
420LTO
For replacing the tape-drive, switch off the
loader, disconnect the power cord and remove
these two screws and the back-panel cover
plate.

Figure 6.8 Replacing the tape drive

StorageLoader Installation and User Manual
Maintenance
Qty
1
1
Qty
1
1
63