Front Panel; Figure 2.2 Front Panel Of The Storageloader - Tandberg Data STORAGELOADER Installation And User Manual

Tandberg Data
An Et hernet connect ion allows for m anagem ent by an
operat or wit h
com put er.
operat ions t hat can be done t hrough t he front panel, such as
m onit oring t he loader's st at us and downloading st at ist ical
and diagnostic information.
For inform at ion on t he inst alled t ape drive; see t he t ape drive
manuals referred to in chapter 1.

2.2.1 Front Panel

The Front Panel includes t he User Cont rol Panel wit h LCD display,
four Cont rol But t ons, t wo LED indicat ors and a St andby swit ch.
The bezels of the two magazines are also visible from the front.
Magazine LED
front bezel indicators

Figure 2.2 Front panel of the StorageLoader

LCD – liquid crystal display
The display is a backlit 122 x 32, dot - m at rix graphical display t hat
can show four lines of 20 characters.
I n various m odes of operat ion, t he display panel screens and
control buttons allow you to do the following:
Enter settings for StorageLoader configuration
Issue operational commands
View StorageLoader status and information
Test StorageLoader functionality
Control Buttons
The labels for t he four cont rol but t ons are displayed in t he corners
of t he LCD. All but t ons have " soft labeling" for different m odes of
operat ion ( i.e., t he funct ions and labels of t he but t ons change
during different act ivit ies) . The act ual soft label for each but t on for
StorageLoader Installation and User Manual
a st andard
The rem ot e operat or
Standby LCD
switch display
Operation and Configuration
web browser on
can do m ost
Control Magazine
buttons front
bezel
a rem ot e
of t he
9