Remote Management Info; Statistics; Utilities Menu - Tandberg Data STORAGELOADER Installation And User Manual

Tandberg Data

4.5.3 Remote Management Info

The Rem ot e Managem ent ( RMM) set up is shown in t he choices
list ed below. This m enu t hree is t he place t o find t he current ly
allocat ed dynam ic I P address, default gat eway and net work m ask
when running in DHCP m ode. The MAC address of t he Loader is
also shown here.
Item name
IP address
mode
Static IP
address
Static netmask
Static default
gateway
Dynamic IP
address
Dynamic
netmask
Dynamic
default gateway
MAC- address

4.5.4 Statistics

Item name
Fetch
Statistics
Stow
Statistics
Power On
Time
Time since
clean

4.6 Utilities Menu

Option
Maintenance
StorageLoader Installation and User Manual
Legal values
Static mode, DHCP mode
0.0.0.0 to
255.255.255.255
0.0.0.0 to
255.255.255.255
0.0.0.0 to
255.255.255.255
0.0.0.0 to
255.255.255.255
0.0.0.0 to
255.255.255.255
0.0.0.0 to
255.255.255.255
Value is fixed
Description
When select ed, t he operat or can scroll t hrough
t he fet ch count and fet ch ret ries for t he drive
and all magazine slots.
When select ed, t he operat or can scroll t hrough
the stow count and stow retries for the drive and
all magazine slots.
Displays Power On Hours for the loader
I f available from t he drive, t his ent ry displays
num ber of hours since t he drive was last
cleaned.
Description
Displays a set of maintenance functions
Operation and Configuration
Default value
DHCP mode
0.0.0.0
0.0.0.0
0.0.0.0
Not applicable
Not applicable
Not applicable
Value is fixed
39