Set Password; Cartridge Handling; Cartridge Slot Numbers; Moving Cartridges To And From The Drive - Tandberg Data STORAGELOADER Installation And User Manual

Tandberg Data

4.6.3 Set Password

Item name
Set Password
WARNING: If you set a password, make sure you do not forget it. If you
do, it ca n on ly be cle a r e d w it h a ssist a n ce fr om Ta n dbe r g D a t a t e ch n ica l
support or by a qualified service technician.

4.7 Cartridge Handling

4.7.1 Cartridge Slot Numbers

The cart ridge slot s have been given num bers as follow: ( see also
Figure 2.3 Internal components of the StorageLoader)
Left m agazine: Slot 1, Slot 2, Slot 3 and Slot 4 ( lowest num ber
closest to the front)
Right m agazine: Slot 5, Slot 6, Slot 7 and Slot 8 ( lowest num ber
closest to the front)

4.7.2 Moving Cartridges to and from the Drive

The norm al operat ions of t he unit are cont rolled by t he host
soft ware applicat ion. When you m ust load or unload a specific
cart ridge using t he cont rol but t ons on t he front panel, do t he
following:
To load a cartridge to the drive:
1. From t he default display press t he m enu but t on and select Load
t o Drive from t he m ain m enu. A screen pict ure like figure 4.11
will be displayed.
selected cartridge's barcode is displayed in the bottom line.

Figure 4.11 Load to Drive

2. Select t he slot num ber of your choice.
em pt y slot s. Press t he
to decrement.
StorageLoader Installation and User Manual
Description
Allows the operator to set a four- digit password
protection for the menu system. The default
password is <0000>, meaning the password is
disabled.
I f a Barcode reader is im plem ent ed, t he
Ok
Load to drive
From Slot: 35
1
but t on t o increm ent and t he
Operation and Configuration
Cancel
The syst em ignores
but t on
41