Figure 3.3 Mounting The Rack Mounting Kit To A Rack; Figure 3.4 Rack Mounting Kit Mounted In Rack - Tandberg Data STORAGELOADER Installation And User Manual

Tandberg Data
Step 5
(Screw
M6x12)
Step 3
(Screw M4x12,
nut and washer)

Figure 3.3 Mounting the Rack mounting kit to a rack

Figure 3.4 shows st ep 5 in t he
description:
Rack m ount ing kit m ount ed in
rack wit h one screw M6x12 in
upper hole on both left and right
side.
On t he rear side t wo screws
m ust be used on bot h left and
right side.
Tot ally six screws are used t o
inst all t he " rack m ounting kit" to
the rack.
Mounting the StorageLoader to the Rack
Make sure t hat all t he screws in t he Rack Mount ing Kit are
tightened properly before installing the StorageLoader in the rack.
18
Rear Rack
Mount Rail
Step 1
Use these holes
if rack depth is
equal or longer
than the
StorageLoader
Step 2
Figure 3.4 Rack mounting kit
mounted in rack
StorageLoader Installation and User Manual
Operation and Configuration
Step 1
Holes to be
used if rack
depth is shorter
than the
StorageLoader
Front Rack Mount Rail
Step 5
(Screw M6x12)