Tandberg Data STORAGELOADER Installation And User Manual page 76

Tandberg Data
The front panel does not display
information but the back light on
the front panel is on
Cartridge movement
Loader does not take inventory
74
• Power cycle the loader by turning off and on the main
power switch on the rear of the loader.
• Verify that the fans starts at power on and then stops after
a few seconds.
• Contact your service representative.
• Make sure the transport screw is removed.
• Make sure both magazines are in their locked position.
• Look up the error code, follow the instructions in the
"suggested action" column.
• Contact your service representative.
StorageLoader Installation and User Manual
Maintenance