Scsi Setup; Remote Management Setup - Tandberg Data STORAGELOADER Installation And User Manual

Tandberg Data

4.4.2 SCSI Setup

The SCSI set up m enu allows select ion of SCSI addresses for bot h
t he Loader and it s int ernal drive. I n addit ion, t he SCSI bus Parit y
can be enabled or disabled. Because of t he SCSI prot ocol, t he
values select ed will only t ake effect aft er t he next Reset of t he
Loader and Drive.
Item name
Loader SCSI ID
Drive SCSI ID
Loader Parity
Loader
Personality

4.4.3 Remote Management setup

The Rem ot e m anagem ent
configurat ion and access cont rol t o t he Loader via t he Loader's
Rem ot e Managem ent Web int erface. The loader m ay eit her obt ain
an I P address, t he net work m ask, and default gat eway from a
DHCP server, or they can be set manually.
Item name
IP Address
assignment
Static IP address
*
Network mask *
Default Gateway * Legal IP address
Remote
Management
access control
36
Legal values.
Legal SCSI ID: 00..15
Legal SCSI ID: 00..15
Enabled, Disabled
VS160 : AT1280- 1R
VS160
LTO : AT1280- 1R
VS160
AT3200- 1R LTO2
StorageLoader
set up
Legal values.
Static mode, DHCP
mode
Legal IP address
range:
000.000.000.000 to
255.255.255.255
Legal IP address
range:
000.000.000.000 to
255.255.255.255
range:
000.000.000.000 to
255.255.255.255
This menu gives access to dialogs that
enables remote management and remote
FW upgrading of the Loader (see table
below).
StorageLoader Installation and User Manual
Operation and Configuration
Default value
04
05
Disabled
VS160 : AT1280- 1R
VS160
m enu allows
Default value
DHCP mode
255.255.255.255
255.255.255.255
255.255.255.255
enabling,