Tandberg Data STORAGELOADER Installation And User Manual page 12

Tandberg Data
any activity is always visible on the display.
LED Indicators
The t wo LED indicat ors are green and am ber. They indicat e t he
StorageLoader activity as follows:
Green LED on: The St orageLoader is eit her running or ready
for operation.
Green LED blinking: Short blinks followed by long int ervals
indicate that the loader is in low power standby mode.
Am ber LED
encountered an electrical or mechanical failure.
Bot h LED's off: The St orageLoader is offline. This is t he case
while t he loader is init ializing, aft er power- on, and when a
magazine is removed.
Standby Switch
A swit ch on t he front panel provides a Loader St andby. I f t he
switch is pushed when the loader is active, the loader will complete
t he current operat ion and go off line and ent er st andby m ode, see
more details in chapter 4.9, Standby Functionality.
Magazine Front Bezel
The front bezel of t he m agazines is visible from t he front . All
m agazine handling is described in det ail in chapt er 4.8, Magazine
Handling.
10
on: Fault LED,
StorageLoader Installation and User Manual
Operation and Configuration
t he St orageLoader has