Using the Tools tab
The Tools tab enables you to reboot, upgrade firmware, and save and restore both configuration and user
database files.
Rebooting the console switch
You can reboot the console switch using the Tools tab on the Manage Console Switch window. Clicking
the Reboot Console Switch button causes the console switch to broadcast a disconnect message to any
active users, then logs out the current user, and immediately reboots the console switch.
IMPORTANT:
cycle before performing any console switch operations. Attempting to access servers during the
boot process might cause system errors that require a hardware reboot.
To reboot the console switch:
Click Tools.
1.
Click Reboot Console Switch. A reboot warning appears.
2.
Click Yes.
3.
You must wait a minimum of 60 seconds after powering up to complete the boot
Managing KVM console switches 71