HP 262586-B21 - IP Console Switch 3x1x16 KVM User Manual page 127

Select a value from the dropdown menu in the Flow Control field o change the flow control method.
10.
This value cannot share the same signal as the Power On Signal value.
Select a value from the dropdown menu in the Toggle Signal field to change the toggle signal.
11.
NOTE:
Select a value from the dropdown menu in the Power On Signal field to change the power on signal.
12.
This value cannot share the same signal as the Flow Control value.
Click OK to save the changes locally and exit the dialog box. If any field is invalid, an error
13.
message appears, and the focus is set to the field in error.
-or-
Click Cancel to exit the dialog box without saving the changes locally.
Click Apply to save any changes.
14.
-or-
Click OK to save any changes and exit.
-or-
Click Cancel to exit the without saving any of the changes.
Configuring alert parameters for serial console switches
The Alerts subcategory lists the defined alert strings for a specified port. You can create, modify, or delete
alert strings for each port (except the dedicated CLI port). Each port can have up to 10 alert strings.
To create, modify, or delete port alert strings:
Select Ports>Alerts.
1.
If you are modifying the dedicated CLI port, then the Toggle Signal field is disabled.
Managing serial console switches 127