Using The Tools Tab For Serial Console Switches; Rebooting The Serial Console Switch - HP 262586-B21 - IP Console Switch 3x1x16 KVM User Manual

Using the Tools tab for serial console switches

The Tools tab enables you to reboot, upgrade firmware, and save and restore both configuration and user
database files.

Rebooting the serial console switch

You can reboot the serial console switch using the Tools tab on the Manage Console Switch window.
Clicking the Reboot Console Switch button causes the serial console switch to broadcast a disconnect
message to any active users, then logs out the current user, and immediately reboots the serial console
switch.
IMPORTANT:
cycle before performing any console switch operations. Attempting to access servers during the
boot process might cause system errors that require a hardware reboot.
To reboot the serial console switch:
Select Tools.
1.
You must wait a minimum of 60 seconds after powering up to complete the boot
Managing serial console switches 145