HP 262586-B21 - IP Console Switch 3x1x16 KVM User Manual page 105

•
If LDAP is selected, the Authentication Parameters tab becomes active. For more information, see
"Using directory services integration (on page 201)."
To change authentication settings:
Select Authentication.
1.
Select Use Local Authentication.
2.
-or-
Select Use LDAP Authentication.
-or-
Select Use RADIUS Authentication.
If use local authentication is enabled, see "Configuring user accounts for serial console switches (on
3.
page 113)."
-or-
If use LDAP authentication is enabled, see "Using directory services integration (on page 201)."
-or-
Managing serial console switches 105